09 · Heat exchangers and heat exchange equipment. Termez

Thermal equipment
in Termez

Heat exchangers, heating coils, cooling coils, and thermal transfer equipment — supplied, installed, and integrated into your HVAC system by Aurum Prodest. We size every component for your heat transfer fluid, air volume, and temperature differential so the system performs at design conditions, not just on paper.

Termez is Uzbekistan's hottest city — summer air routinely hits +48°C to +50°C, where ordinary air conditioners enter permanent overload. Aurum Prodest installs only high-ambient certified equipment with operating limits to +52°C, oversizes condensers deliberately, and shields lines from radiant roof heat. Military, border, and civilian sites alike need cooling that starts on the worst afternoon, not just on average weather spreadsheets.

Equipment selection depends on whether your system uses water, glycol, steam, or refrigerant as the heat transfer medium. We match coil face area, row depth, and fin spacing to the required duty and available pressure drop in both air and fluid circuits.

  • Heat exchanger and coil sizing
  • Water and refrigerant circuit design
  • Equipment supply and delivery
Residential buildingsMilitary facilitiesBorder infrastructureRetail properties
Thermal equipment in Termez Termez · 09

By the numbers

12+ years on market
500+ projects delivered
50+ specialists
5yr warranty

About the service

Equipment selection depends on whether your system uses water, glycol, steam, or refrigerant as the heat transfer medium. We match coil face area, row depth, and fin spacing to the required duty and available pressure drop in both air and fluid circuits.

Water coils connect to boiler loops, chiller circuits, or district heating supplies. Refrigerant coils integrate with DX systems and heat pumps. Each connection is designed for proper flow distribution, venting, and future maintenance access.

Before start-up we perform hydraulic pressure tests, check for leaks at every joint and gasket, and insulate bare pipework to prevent condensation and energy loss. Coil banks are installed with adequate drainage slope for condensate removal.

Commissioning verifies that supply air temperatures meet specification across the operating range. We connect coils to air handling unit automation — enabling frost protection, staging, and temperature control sequences that protect equipment and maintain comfort.

Our experience in Termez

Surkhandarya's furnace climate shrinks compressor life if design margin is ignored. We specify Daikin VRV IV-S High Temperature lines, Mitsubishi Heavy Industries SRK-ZMX-S series, and other catalogs explicitly rated for desert rooftops — then verify electrical supply and phase balance before startup.

Border and institutional buildings often sit in exposed lots with minimal shade. Mounting on vibration pads, sun canopies, and weekly condenser washing during July–August are part of our maintenance playbook — not optional extras.

Residential clients in Termez still deserve efficient bills: inverter technology matters even at extreme ambient, because short-cycling waste is worse when units are undersized. We calculate with ASHRAE-style caution adapted to local reality and document every room load.

Service areas in Termez

  • At-Termezi Avenue
  • Friendship Bridge area
  • Airport district
  • Surkhan industrial
  • Jarkurgan road
  • Angor direction
  • Sultan Saodat vicinity
  • Bazaar center
  • Military town periphery
  • New residential south

Why clients choose us in Termez

  • Specialized +52°C rated outdoor equipment only
  • Deliberate oversizing margin for Surkhandarya peak heat
  • Shading, elevation, and line insulation for roof installs
  • Quarterly maintenance protocol for extreme season
  • Experience with institutional and secured sites

What's included

  • 01 Heat exchanger and coil sizing
  • 02 Water and refrigerant circuit design
  • 03 Equipment supply and delivery
  • 04 Installation in AHUs and duct sections
  • 05 Piping, valving, and insulation
  • 06 Hydraulic pressure and leak testing
  • 07 Automation and control integration
  • 08 Scheduled maintenance and coil cleaning

How we work

  1. 01 Thermal duty and airflow calculation
  2. 02 Equipment specification and ordering
  3. 03 Delivery and mechanical installation
  4. 04 Piping connection and insulation
  5. 05 Pressure testing and commissioning
  6. 06 Performance verification and handover

Advantages

Experienced specialists
Work warranty
Certified equipment
Same-day site visit
Transparent pricing
In-house production

Questions about Termez

Which air conditioners work at +50°C in Termez?

Only specialized high-ambient series — for example Daikin VRV IV-S High Temperature and Mitsubishi Heavy Industries SRK-ZMX-S — certified to ~+52°C. Consumer-grade units are not offered for primary cooling here because they void warranty and fail in the first heatwave.

Does equipment need more frequent servicing in this climate?

Yes. During active cooling season we recommend service every three months: coil cleaning, refrigerant charge verification, electrical torque checks, and condenser wash — more often if dust storms coat fins.

Can standard units be "upgraded" to survive Termez?

No honest upgrade path exists inside undersized hardware. Correct solution is proper high-ambient equipment with electrical and line set matched at design stage.

Do you install in secured or institutional facilities?

We work under site access rules provided by the client — escorted entry, background checks where required, and discrete scheduling. Technical scope and documentation match civilian projects.

How fast can you deploy to Termez in an outage?

Emergency response depends on parts availability from Tashkent; we recommend critical sites keep spare filters, a monitored maintenance contract, and documented spare indoor/outdoor pairing for fastest swap.

Need a consultation in Termez? We respond within 15 minutes. Engineer visit and site survey are free when you sign a contract.

Get a consultation